USAGE: Gluing ABS edges, gluing PVC edges, gluing laminate edges. CHARACTERISTICS: White hot melt adhesive Hranitherm 600.71 is characterised by perfect versatility based on its excellent properties, such as melting rate, higher thermal resistance and viscosity. Ideal compromise for all colour combinations. Available also in light beige colour (Hranitherm 600.70). Brookfield viscosity at 200°C 50,000-80,000 mPas Melt index at 190°C 130-170 g/10 min Softening point (ring and ball method) 100 °C Density 1.16 g/cm3 Suitable working conditions: Processing temperature Material moisture content Pressure on snub rollers   190–200 8–10 3–5   °C % kg/cm2 APPLICATION: When using the hot melt adhesive, observe the application temperature and check it on a regular basis by measuring on the roller or nozzle. The temperature shown on the edge-banding machine control panel may differ from the actual temperature. Lower temperature of the adhesive may affect its open time and consequently impair the bonded joint quality. At a higher temperature, the adhesive may degrade, which affects its colour, viscosity and adhesion. When banding edges from various materials, regular testing of banding strength and quality is advisable. Recommended temperature of the environment and materials is  15–25°C. Clean any residual adhesive on furniture elements using Hraniclean 01 (08). In glue pots use Jowat 236.50. PACKAGING AND STORAGE: Keep in original container. If stored in closed containers in a cold and dry place at temperatures not exceeding 20°C, the shelf life is 24 months.